Filter
Top Products
Using the surface unit controls
PUSH IN and turn until
the setting shows in the
window.
To bake, turn the Oven
Selector Knob to BAKE.
The Surface Unit Control Knobs must be pushed in before turning
them. This helps avoid turning them on accidentally when wiping off the
Control Panel. And it helps keep small children from turning them on. You
must push in on them.. .then turn until the setting you want shows in
the window.
The four Surface Unit Controls and Signal Lights are arranged in
the same order as the Surface Units. For example, to turn on the right
front Surface Unit [ . I> push in and turn the lower right Surface Unit
Control [ ;I. The lower right Signal Light [
i ] will glow.
The knob may be set anywhere between “HI” and “OFF.” As you
use your surface units. you WIII get used to the settings that match your
pots. pans and favorite foods the best.
As a guide, the setting should cook at about the following heats.
HI
-To start most foods cooking. To bring water to a boil.
MED-HI
-To hold a rapid boil. to fry pancakes or chicken.
MED
- To make gravy, puddings and icings: to cook large quan-
tities of vegetables.
MED-LO
-To keep food cooking after starting it at a higher setting.
LO
-To keep food warm until ready to serve. You can set the
heat higher or lower within the “LO“ range to help keep
food at the temperature you want
The Signal Light will glow whenever a Surface Unit is on. Be
sure this light is off when you have finished cooking.
Using the Oven Controls
To bake, broil or time bake in the upper oven. set the Upper Oven
Selector and the Upper Oven Temperature Control Knob. To bake. broil
or time bake in the lower oven. set the Lower Oven Selector and the
Lower Oven Temperature Control Knob
Baking:
First-Follow the directions on page X for “Positioning Oven
Racks.”
Second-Turll the Oven Selector Knob to “BAKE.”
Third-Turn the Oven Temperature Control Knob to the baking
temperature you want The Oven Signal Light will glow while the oven is
heating. When this light goes off, the oven has heated to the temperature
you set.
Fourth-PIact,
food in oven. The heating elements turn off and
on during baking to keep the oven at the temperature you set The Oven
Signal Light will glow when the heating elements are on.
Fifth-When
the baking IS done. turn both the Oven Temperature
and Oven Selector Kllobs to “OFF .’