Filter
Top Products
Using the Self-Cleaning cycle
The self-cleaning cycle uses very high heat to burn away soil. Before you start,
make sure you understand exactly how to use the cycle safely.
Before you start
1. Clean the shaded areas by hand.
They do not get hot enough dur-
ing the Self-Clean cycle for soil to
burn away. Use hot water and
detergent.or a soapy steel-wool
pad on...
l
the frame around the oven.
DO NOT clean the fiberglass seal.
DO NOT move it or bend it. Poor
cleaning and poor baking will result.
2.
Remove the broiler pan and any
pots or pans you may have stored
in the oven. They cant stand the
high heat.
DO NOT
Clean Seal
Clean Door
Clean
Frame
Wipe out any loose soil or grease
This will help reduce smoke dur-
ing the cleaning cycle.
If your oven has a rotissene. make
sure the motor socket cover is
closed.
Put oven racks on the second
and fourth guides. During the Self-
Cleaning Cycle they will darken
and become harder to slide. See
tips on page 18. If you want the
oven racks to remain shiny, clean
them by hand.
Turn on the vent hood or other kitchen vent during the cleaning cycle.
This will help remove smoke, odor and heat that are normal during the cycle
SPECIAL CAUTIONS:
DO NOT use commercial oven
cleaners in your oven. Damage to
the porcelain finish may occur.
DO NOT force the Lock Lever, you
could bend or break it. The lever is
designed to stay locked until the
oven is cool enaugh to safely open.
Wait until it moves freely.
DO NOT use foil or other liners in the
oven. During the cleaning cycle foil
can burn or melt and damage the
oven surface.
12