Filter
Top Products
3.
Choose
an Auto Defrost setting by
touching the appropriate Number Pad.
The Display will show “Enter” and the
“LBS.” Indicator will be displayed. This
example shows an entry of r” for Steaks,
Chops, Fish. (See the “Auto defrost chart”
on page 18 or the Cook Guide label on
the frame behind the door for Auto
Defrost settings.)
4. Touch
Number Pads to enter the food’s
weight. The weight will appear on the
Display. This example shows an entry of
“2.0” for two pounds.
NOTE:
If “ERROR” appears on the
Display,
touch
OFF/CANCEL and
start
over. See
the “Auto defrost chart” on
page 18 for weight ranges available for
each food category.
5.
Touch
START/ENTER. The Display will
count down the time to show how much
defrosting time is left.
6. After the first stage is completed,
the
oven will stop, two tones will sound, and
directions will appear on the Display.
Open
the door,
turn
meat over and
shield
any warm portions. (The Displays
shown are just examples of directions you
will see, depending on the type of meat
being thawed.)
Close
the door. “PRESS
START” will appear.
7. Touch
START/ENTER. The Display will
continue to count down the second stage
of the defrost cycle.
8. After the second stage is completed,
the oven will stop, two tones will sound,
and directions will appear on the Dis-
play.
Open
the door,
shield
any warm
portions and close the door. “PRESS
START” will appear.
17