Filter
Top Products
Using SENSOR COOK
Cooking with SENSOR COOK takes the
guesswork out of microwave cooking. The
microwave oven automatically adjusts
cooking times and powers by detecting the
moisture and humidity emitted by the food as
it heats.
1. Put
food in oven and
close
the door.
2. Touch
SENSOR COOK. The SENSOR
Indicator will come on and “FOOD,, will
show on the Display.
3.
Choose
a Sensor Cook setting by touch-
ing the appropriate Number Pad. (See the
Sensor Cook Guide located behind oven
door on frame for setting information.)
NOTE:
If you touch the wrong Sensor
setting,
touch
the correct setting. The
chosen setting will appear on the Display.
4. Touch
START/ENTER. The sensor now
detects the moisture and humidity emitted
by the food.
NOTE: Do not open
the door or
touch
OFF/CANCEL during this part of the
cooking cycle. The measurement will be
interrupted.
If “ERROR” appears on the Display
before cooking starts,
touch
OFWCAN-
CEL and
start over.
If “ERROR” appears
after cooking has started,
touch
OFF/
CANCEL and continue cooking using a
timed cycle. See page 14 or 15.
5. When the Display shows the remaining
cooking time, you
can open the door to
stir or season the food.
NOTE:
Before using SENSOR COOK, be
sure
the Display is blank. If the Display is
not blank,
touch
OFF/CANCEL once or
twice.
m
23