Filter
Top Products
Cleaning and caring for your range
CONTROL PANEL AND KNOBS
1.
First make sure lower oven and surface
unit control knobs are set on OFF. Ail knobs
pull straight off. Surface unit knobs have
a collar and spring.
3. Wash knobs and surface unit collars in
warm soapy water. Rinse well and dry.
2. Use warm soapy water and a soft cloth to
wipe the panel. Rinse and wipe dry.
Collar
\-
FLU \
f
Put small end
!J
/
of sprlng
closest to
N
control panel.
4. Push knobs straight back on. Make sure
they point to OFF. Make sure the collar and
spring on surface unit knobs are put to-
gether as shown.
SURFACE UNITS AND REFLECTOR BOWLS
REMOVING
1.
Be sure surface units are OFF and COOL.
Receptacle
3. Pull the surface unit straight away from the
18
receptacle.
2. Lift the edge of the unit opposite the re-
ceptacle just enough to clearthe reflector
bowl.
4. Lift out the reflector bowl