Filter
Top Products
Cleaning and caring for your range
CONTROL PANEL AND KNOBS
4. First make sure lower oven and surface
unlt control knobs are set on OFF. All knobs
pull stralght off. Surface unlt knobs have
a collar and sprlng.
3. Wash knobs and surface unit collars In
warm soapy water Rtnse well and dry
2. Use warm soapy water and a soft cloth to
wipe the panel Rinse and wrpe dry
Collar
7
.
Put
small end
of spring
closest to
control panel.
4. Push knobs straight back on Make sure
they point to OFF Make sure the collar and
spring on surface unit knobs are put to-
gether as shown
SURFACE UNITS AND REFLECTOR BOWLS
REMOVING
1.
Be sure surface untts are
OFF
and COOL. 2. Lrft the edge of the unit opposite the re-
ceptacle just enough to clear the reflector
bowl
Trim rlng
3. Pull the surface unit stralghf away from the
receptacle
4. Lift out the reflector bowl and trim ring
18