Filter
Top Products
ents
Solld elements am not removable. After
each use, wipe off the elements with
a damp, soft cloth and soapy water.
Burned-on food may be removed with a
soapy scouring pad. The red spot in the
center of the elements will gradually
wash off. This is normal and will not affect
the operation of the elements.
IMPORTANT:
AFCER EACH
CLEANING.
I
-----------,
HEAT ELEMENTS UNTIL DRY.
To darken elements or to remove rust spots caused by improper drying, apply
a thin coat of salt-free oil to the CCCL elements, then heat for 3-5 minutes. If
elements have dark spots, the oil treatment will improve their appearance but
not eliminate the spots.
The stainless steel spillrings will gradually yellow from the heat of the
elements and pans. This is normal. The yellowing can be removed by using
stainless steel cleaner on the spillrings.
Using the Self-Cleaning Cycle
The self-cleaning cycle uses very high heat to burn away soil. Before you start,
make sure you understand exactly how to use the cycle safely.
Before You Start
l the frame around the oven,
1.
Clean the shaded areas by hand.
l the inside of the door,
They do not get ho? enough during
especially the part outside the
the Self-Clean cycle for soil to
oven seal.
burn away. Use hot water and
DO NOT clean the ftberglass seal.
detergent or a soapy steel-wool
DO NOT move It or bend It. Poor
r cleanlna
and Door
baklna will
oven racks to remain shiny, clean
them by hand.
2. Remove the broiler pan and any
pots or pans you may have stored
in the oven. They can’t stand the
high heat.
3.
Wipe out any loose soil or
grease. This will help reduce
smoke during the cleaning cycle.
4. Put oven racks on the second
and fourth guides. During the Self-
Cleaning Cycle they will darken
and become harder to slide. See
tips on page25 If you want the
Clean Frame
Y
Chrome
fl’ioor discolor.
reflector bowls must not
be cleaned In the oven. They will