Filter
Top Products
Command pads
The command pads tell the oven what to ds and
in what order. A few examples:
-CiocWSet tells the oven you are going to set
the clock.
Each command pad (except Off/Cancel and
Start/Enter) has its own indicator. The indicator
comes on when you push the command pad.
-Off/Cancel tells the oven to turn off.
Setting the clock
1. Push the Clock/Set pad. The colon flashes
and TIME will light up on the display.
2. Use the Hour and Minute pads to set thss time
of day. Push the “up” (A) or “down” (V;
pad(s) until the correct time shows on the
display.
3. Push the Start/Enter pad.
NOTE: If you do not want the clock time displayed,
push and hold the Clock/Set pad for 4 seconds.
To display the clock tims again, push the Clock/Set
pad once.
Using the electronic Minute Timer
The Minute Timer does not start or stop the oven.
lt works like a kitchen timer. You can set it in
hours and minutes up to 11 hours,
59
minutes.
The Minute Timer will display minutes and
seconds for settings under one hour. You will
hear four l-second tones when the set time is up.
1. Push the Timer Set pad. TIMER will come on
and the display will show “0:OO” with the colon
flashing.
TIMER
11