Filter
Top Products
4. When the terminal is pushed into the recep-
tacle as far as it will go,, push down the edge
of the surface unit opposite the receptacle.
The element hold-down clip will keep the
surface unit from moving around.
NOTE: Reflector bowls reflect heat back to the
utensils on the surface units. They also help
catch spills. When they are kept clean, they
reflect heat better and look new longer.
ff a reflector bowl gets discolored, some 01 your
utensils may not be flat enough, or some may be
too large for the surface unit. In either case,
some of the heat that’s meant to go into or
around a utensil goes down and heats the
reflector bowl. This extra heat can discolor it
Removing the oven window
(model RS6755XB)
ff your oven has an oven window instead of i.he
black glass door, you can remove the outer glass
and frame for cleaning. Do not take apart a black
glass door.
To remove the outer window:
1. Turn off all controls. With the door closed,
remove the screws from the top of the oLiter
window frame.
2. Slightly tip the window and frame out frcm
the top.
3. With both hands, lift up on both sides of the
frame.
To replace the outer window:
1. Fit the bottom tabs of the frame into the
bottom of the window opening.
2. Push the top of the frame into place whil!?
pushing down.
3. Replace the screws.
33