Filter
Top Products
2. Push the Bake pad to enter the Bake mode.
Use the Temp pad(s) to set the desired
temperature. Push A to raise the temperature
or to lower the temperature in 5°F increments.
Use these pads until the desired temperature
shows on the small display.
After you have set the desired temperature,
the display will show the set temperature and
the time of day. BAKE will light up.
3. Push the Cook Time pad. “0:OO” with the
colon flashing and COOK TIME will show on
the display.
4. Use the Hour and Minute pads to set the
desired cooking time. Push the “up” (A) or
“down” (V) pad(s) until the correct time shows
on the display.
This example shows a desired baking/roasting
time of 30 minutes.
5. Push the Start/Enter pad. “Lo”“, HEAT, BAKE,
TIMED and the set cook time will light up on
the display to show that the oven is heating.
NOTE: The display will show “door” and a
tone will sound once a minute for 5 minutes if
the door is latched when you try to bake/roast.
You can change the temperature or time
setting any time after pushing the Start/Enter
pad by repeating just Steps 2 through 4..
6. The display will count down the baking’
roasting time in minutes.
7. When the baking/roasting time is COITF
pleted, the oven will turn off automatically,
beep four times and “End” will show on the
display. You will also hear four l-second tones
every minute until you push the Off/Cancel
pad.
NOTE: To disable reminder tones, push ard
hold the Cook Time pad for 4 seconds. To
reactivate tones, repeat this procedure
18