Filter
Top Products
Adjusting the oven
temperature control
Does your oven seem hotter or colder than your
old oven? The temperature of your old oven may
have shifted gradually without you noticing the
change. Your new oven is properly adjusted to
provide accurate temperatures. But, when
compared to your old oven, the new design may
give you different results.
If, after using the oven for a period of time, you
are not satisfied with the temperature settings,
they can be adjusted by following these steps:
1. Push and release the Bake Temp button.
2. Turn the Set Knob until 550°F appears on the
small display.
3. Within two seconds, push and hold the Bake
Temp button until the special two-digit display
appears. Release the Bake Temp button.
The display now indicates the amount of
degrees offset between the original factory
temperature setting and the current tempera-
ture setting. If the oven control has the original
factory setting, the display will read “00”.
4. You can now change the setting up or down
35”F, in 5°F steps. To do so, turn the Set
Knob until the desired amount of offset
appears in the display.
NOTE: If you have decreased the setting, a
minus sign (-) will appear before the number.
5. When you have made the desired adjustment,
push the Cancel button to go back to the time
of day display.
NOTE: Adjusting the oven temperature control
will only change cooking temperatures. It will not
affect self-cleaning temperatures.
13