Using Your Oven
This oven is equipped with an electronic ignitor.
The electronic ignitor automatically lights the
oven burner each time it is used. This oven
cannot be used during prolonged power failure.
The electronic oven controls
There are three parts in the oven control section:
-The digital display.
-The command buttons.
-The Set Knob.
Instructions for each oven control are covered on
the following pages. Read them carefully.
When you first plug in the oven, the time
display will flash until you set a new time. If, after
you set the clock (page 6) the time display
flashes, your electricity was off for a while. Reset
the clock.
Digital display/clock
When you are not using the oven, this is an
accurate digital clock. When using the oven or
Minute Timer, the display will show the time,
temperature settings and what command buttons
have been pressed.
When showing the time of day, the display will
show the hour and minutes.
When using the Minute Timer, the display
shows minutes and seconds in the following
sequence:
l
For settings from 0 minutes to 1 minute 55
seconds, the display will increase in 5second
increments.
l
For settings from 2 minutes to 9 minutes 50
seconds, the display will increase in 1 O-second
increments.
l
For settings from 1 O-59 minutes, the display will
increase in 1 -minute increments.
l
For settings from 1 hour to 1 hour 55 minutes,
the display will increase in 5-minute increments.
l
For settings from 2 hours to 9 hours 55
minutes, the display will increase in lo-minute
increments.
When using Bake Time, the display shows hour
and minutes.
Command buttons
The command buttons tell the oven what to do
and in what order. A few examples:
-Clock tells the oven you are going to set the
clock.
-Cancel tells the oven to turn off.
Each command button (except Cancel) has its
own indicator. The indicator comes on when you
touch the command buttons.
5