Filter
Top Products
To replace the door:
Opening
1. Grasp the door firmly on both sides.
2.
Place
the top of the hinge arm against the
top of the opening in the oven frame.
Push the bottom of the door in until the
hinge is all the way into the opening.
3.
Gently lower
the door so that the bottom
of the hinge arm rests on the bottom of
the opening.
4.
Open
the door to the fully opened posi-
tion.
5.
Replace
the retaining brackets and
screw(s) on each side of the oven door.
6. Close the oven door completely. If the
door does not line up with the oven
frame,
remove
the door and repeat the
above steps.
Removing and replacing the oven bottom
To remove the oven bottom:
Horizontal
.
‘baffle
1. Lift up
the lift tab at the back of the oven
bottom.
2.
Slide
oven bottom out and
lift
it up and
Out.
20
To replace the oven bottom:
Horizontal
1.
Slide
horizontal tabs on back of oven
bottom into holes at the back of the oven
Cavity.
2.
Lower
the front of the oven bottom so
locking flange fits into locking channel.
3. Replace
lift tab to hold oven bottom in
place.