Surface Burners
TYPICAL TCP BURNER RIME
I
Lift up the cooktop, following the instructions on page12.
Wipe off surface burners with warm soapy water and a soff cloth after each
use.
Occasionally check surface burner flames for size and shape as shown. if
flames do not burn properly, you may need to remove the surface burners for
cleaning [see page16), or call a qualified technician for burner adjustments.
The Oven Door
Removing the oven door will make it easier to clean the oven.
Open the door to the flrst stop
position.
2. Hold the door at both sides and lift
off of hinges at bottom corners of
door.
3. To replace,
fit the bottom corners
of the door over the ends of the
hinges.
Push the door down evenly. The
door will close only when it is on
the hinges correctly.