Filter
Top Products
22
LIFT-UP COOKTOP AND SURFACE BURNERS
CARING FOR YOUR RANGE
1. Remove the surface burner grates.
5. Check the burner flames once in a while for pro-
per size and shape as
shown. A good flame is
blue in color. If flames
lift away from ports, are
yellow, or are noisy, turn
off the burner. Allow the
burner to cool and follow
Step 6. If you still have
a problem, contact an
authorized Whirlpool
service technician to
check the air/gas mixture or see the Installation
Instructions.
1
2
"
Ports
wWARNING
Carbon Monoxide Poisoning Hazard
Do not operate with a yellow flame.
Doing so can result in death, heart attack,
or convulsions.
2. Lift the front of cooktop at both front corners
until the support rods
lock into place.
NOTE: Do not drop the
cooktop. Damage could
result to the porcelain
and the cooktop frame.
3. Wipe the surface under the cooktop with warm,
soapy water and a
sponge. Use a soap-
filled plastic scrubbing
pad on heavily soiled
areas.
4. Wipe off the surface burners with warm, soapy
water and a sponge after
each use. To remove
cooked-on food, soak
the burners in a vinegar
and water solution for
20-30 minutes. Then
scrub them with a
plastic scrubbing pad.
(See page 21 for more
information.)
6. If the ports are clogged, clean with a straight
pin. DO NOT enlarge
or distort the ports.
DO NOT use a tooth-
pick to clean the ports.
Toothpick pieces may
clog the ports.