Whirlpool SF350BEE Range User Manual


 
24
CARING FOR YOUR RANGE
REMOVING THE OVEN DOOR (CONT.)
To remove:
1. Open the door about halfway. Insert nails or
screws into both hinge
hangers. Do not remove
them while the door is
removed from the
range.
To replace:
NOTE: The nails or screws you inserted must still be
in both sides of the door.
1. Grasp the door on the sides with your fingers on
the front of the door and your thumbs on the
inside surface.
2. Rest the hinge hanger so that it is flat (at the
bottom of the hinge hanger on the bottom of
the front frame slot).
3. Position the door with the hinge hanger slots
almost parallel to the front frame.
4. Push up and in until the hinge hanger slots
become fastened to the range. Lower the door
and rotate it slightly from the front to the back
until the slots are fully fastened. The hinge
hanger will be close to the bottom of the front
frame slot.
5. Pull door open about halfway and remove the
nails or screws.
6. Close the door.
2. Close the door as far as the nails or screws will
let you.
3. Rotate the door toward the range. Lift up the door
until it stops. Do not use
the door handle to lift
the door. Rotate the
door toward the floor
and pull it toward you.
Remove nail
or screw
Hinge
hanger
Hinge
hanger
flat
Front frame
slot bottom
In
Up
Oven door
Range