Filter
Top Products
USING YOUR REFRICERAT~R
To obtain the best possible results from your refrigerator, it is iImportant that you operate it
properly. This section tells you how to set the controls, remove and adjust the features in your
refrigerator, and how to save energy.
SEITING THE CONTROLS
When you first install your refrigerator, set the
IMPORTANT: If you add food before the refrigerator
Refrigerator Control at 3 and the Freezer Control
has cooled completely, your food may spoil. Turning
at B. Give your refrigerator time to cool down
the Refrigerator and Freezer controls to a higher than
completely before adding food. It is best to wait
recommended setting will not cool the compart-
24 hours before adding food.
ments any faster.
How the controls work
There are two controls in your refngerator
The Freezer Control functions as an air flow director
compartment. Knowing how each works will help
Setting “A” will direct
you set the controls properly for your own house-
more
of the cold
air into
hold conditions.
the fresh food section,
The Refrigerator Control functions as the thermostat
while setting “C” will
for the entire product
direct more of the cold
REFRIGERATOR
(fresh food and freezer
air into the freezer
sections). The higher the
section. The cold air
number setting, the
travels from the freezer
longer the compressor
compartment through
will run to keep the
the
top vent,
into your
temperature lower.
fresh food section
NOTE: Your refrigerator
(see the diagram Ensuring Proper Air Circulation
will
not
cool when the
on pacge 13).
Refrigerator Control In
set to OFF.
Hold your hand in front of the
top vent (see
the diagram Ensuring Proper Air Circulation on
page 13) and adjust the Freezer Control to feel
the difference in air flow.
a
t-
II___
r]
“”
I-4
12
WITH QUESTIONS OR COMMENTS