Filter
Top Products
SPACE REQUIREMENTS
--__
_._.__ .^._ ..--_-.
To ensure proper ventilation for your refrigerator,
’
I
allow for a M inch (1.25 cm) space on each side
; and at the top. For models that have ice and water
dispensers, make sure you leave some extra space
) at the back to allow for the water line connections.
I
Y2” minimum at
1
-
/
g
I
-
-
I
_-____ I ___. -.-_ _--
_ _....... _._
_
---
LEVELING
--_.-^ -_-. _--~ _--. -. .,__.._ -.__
,
I-
I
_/
Move the refrigerator into it’s final position. Use a
level and check that the refrigerator is level.
NOTE: If your refrigerator has an automatic ice
maker, do this before attaching the ice maker to a
water supply. If you move the refrigerator after the
water line has been hooked up you may loosen or
disconnect the fittings.
left to lower
Use a screw-
driver to adjust
Your refrigerator has two leveling screws, one on
each side.
To level your refrigerator:
1.
Check to see if the rear of the refrigerator is
level. Shimming may be necessary if your
refrigerator is placed on an uneven surface.
Leveling screw
2. Adjust the front of the refrigerator by removing
the base grille (see page 25).
3.
Turn the leveling screw clockwise on the side
that you want to raise. If you want to lower that
side, turn the screw counter clockwise.
--.-
--_I ----- -_._- ----...
~-
WITH QUESTIONS OR COMMENTS