Filter
Top Products
20 SuperStat Pro User Guide
Programming Heating and Cooling
Quick Guide Step Description Thermostat Display
Press until time
is flashing.
Press to set time
at which
selected period
will begin.
5
Press the TIME/SET button once until time flashes in the
display. Use the arrow buttons to set the time at which you
want the selected time period of the day to begin. The
arrow buttons change the time in 15 minute intervals.
Note: PM displays to the right of the time to indicate PM.
If PM does not appear next to the time, it is AM.
You set only the start time for each time period. Each
period ends automatically at the beginning of the next time
period. The time periods (MOR, DAY, EVE, and NHT)
must follow each other in order. For example, if you set
MOR to begin at 6:30 AM, then DAY must begin after
6:30 AM.
To skip a period, just program the start time and setpoint to
match the previous period.
Time will flash: