Filter
Top Products
17
Delay start
The start of the selected programme can be delayed
between 1 and 9 hours in steps of 1 hour using the “DE-
LAY START” button.
– By repeatedly pressing the button “DELAY
START”, the delay time can be programmed in
hours, and will be displayed in the display field. The
control lamp flashes until the door has been clo-
sed.
Before washing commences the door can be opened
without the programme being lost.
After the pre–selected start time has expired, the ma-
chine starts up the selected programme automatically.
Programme selection /
Correcting or deleting
delay start
1. Open the door.
The time remaining before washing commences is in-
dicated on the control panel.
2. Press the “CANCEL” button for at least three se-
conds.
The start delay programme is deleted.
Press the “CANCEL” button again to delete the was-
hing programme.
– Select the programme again and start it or pro-
gram the start delay again.
Save energy
The wash temperature is reduced using the “ECO
PLUS” button, as a result less energy is consumed
during heating up (see “e” on the programme chart).
End of the programme
A repeated acoustic signal tells you that washing has
finished.
A line flashing in the programme display also indicates
that washing has finished.
Delay start control lamp
Delay start button
CANCEL /
Correction button
Start time / Remaining time display /
Error message
”ECO PLUS” button
Start time /
Remaining time display /
Error message