Filter
Top Products
www.zephyronline.com
Installation - Internal B lower
8
The internal blower kit consists of the blower
and capacitor box with wiring.
1. Position blower as shown.
2. Attach blower to ange as shown using
the provided 1/2” 5x15mm screws with
washers.
3. P osition capacitor box as shown.
4. Secure capacitor bo x to hood using the
provided 1/2” self tapping screws.
ATTENTION
The following are intructions for installing internal blower model CBI-600. For instructions on preparing for external
blower model CBE-1000 please turn to page “10”. Before installing, verify that motor spins freely.