Filter
Top Products
18
Replacing Light Bulbs:
CAUTION: Light bulbs become extremely hot when turned on. DO NOT touch bulbs until switched o
and cooled. Touching hot bulbs may cause serious burns.
Make sure all power is turnedo and bulbs are not hot.
Remove bulbby pressing both ends of the metal retainingclip together, the lightsocket willnow protudefrom the hood
allowingyou to remove the bulb.(B e careful when releasing retain clip as it is under pressure to hold it in place)
Replacement halogen bulbs are availableat most stores which sell lightbulbs. Purchase typeGU-10, 120 V, 50W.
To replace moodlightingbulb,removebae lter from hood.Lift up the metal plate which is inside the hoodon the left
and rightsides. It is heldon withtwo philipshead screws. Unscrew moodlightingbulbcounter-clockwise and replace
witha standard 40W, 125V-1 30V mediumbase bulb.
Press together
toreleaseclip
HalogenBulb
MoodLightingBulb
MetalPlate
Maintenance - Lights