xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
171
DGS-3627:admin# show authentication ports
Command: show authentication ports
Port Methods Auth Mode Authentication VLAN(s)
--------- ---------------- ---------------- ---------------------
1 None Host based 1,3,5,9,11,88,16
18,56
2 Any Port based
3 802.1X_IMPB Host based
4 None Host based 2000,2005
5 IMPB_JWAC Port based
6 None Host based
7 None Host based 1-20
8 802.1X_IMPB Host based
9 None Host based
enable authorization
Purpose The enable authorization command will enable authorization.
Syntax
enable authorization attributes
Description Used to enable authorization attributes.
When the authorization for attributes is enabled, whether the authorized attributes (for
example VLAN, 802.1p default priority assigned by the RADUIS server or local database will
be accepted which depends on the individual module’s setting.
Authorization for attributes is enabled by default.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
This example sets authorization global state enabled:
DGS-3627:admin# enable authorization attributes
Command: enable authorization attributes
Success.
disable authorization
Purpose The disable authorization command will disable authorization.
Syntax
disable authorization attributes
Description Used to disable authorization attributes.
When the authorization for attributes is disabled, the authorized attributes (for example
VLAN, 802.1p default priority assigned by the RADUIS server or local database will be
ignored even if the individual module’s setting is enabled.
Authorization for attributes is enabled by default.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
