xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
264
config dvmrp
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To configure DVMRP configurations of IP interface “System”:
DGS-3627:admin# config dvmrp ipif System neighbor_timeout 30 metric 1 probe 5
Command: config dvmrp ipif System neighbor_timeout 30 metric 1 probe 5
Success
enable dvmrp
Purpose Used to enable DVMRP.
Syntax
enable dvmrp
Description
This command, in combination with the disable dvmrp command below, is used to
enable and disable DVMRP on the Switch.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To enable DVMRP:
DGS-3627:admin# enable dvmrp
Command: enable dvmrp
Success.
disable dvmrp
Purpose Used to disable DVMRP.
Syntax
disable dvmrp
Description
This command is used, in combination with the enable dvmrp command above, is
used to enable and disable DVMRP on the Switch.
Parameters None.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To disable DVMRP:
