A SERVICE OF

logo

Open as PDF
next previous
xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
635
show snmp groups
Purpose This command is used to display the names of groups on the switch and the security model,
level, the status of the different views.
Syntax
show snmp groups
Description The show snmp groups command displays the names of groups on the switch and the
security model, level, the status of the different views.
Note: This is SNMPv3 command, if it is used; All SNMPv1/v2 commands are not necessary.
Parameters None.
Restrictions None.
Example usage:
To show SNMP groups: