xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
555
DGS-3627:admin# create pim static_rp group 231.0.0.1/32 rp 11.1.1.1
Command: create pim static_rp group 231.0.0.1/32 rp 11.1.1.1
Success.
delete pim static_rp
Purpose To remove the multicast group IP address used in identifying the Rendezvous Point (RP).
Syntax
delete pim static_rp group <network_address>
Description This command will remove the multicast group IP address used in identifying the Rendezvous
Point (RP). This command is for PIM-SM configurations only.
Parameters
group <network_address> − Enter the multicast group IP address used in identifying the
Rendezvous Point (RP). This address must be a class D address.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To remove a static RP:
DGS-3627:admin# delete pim static_rp group 231.0.0.1/32
Command: delete pim static_rp group 231.0.0.1/32
Success.
show pim static_rp
Purpose To show the Static Rendezvous Point (RP) settings.
Syntax
show pim static_rp
Description This command will display the Static Rendezvous Point (RP) settings. This command is for
PIM-SM configurations only.
Parameters None.
Restrictions None.
Example usage:
To display the static RP settings as configured for the multiple access network:
