A SERVICE OF

logo

xStack
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
688
upload attack_log_toTFTP
Description This command is used to upload the attack log on a unit.
Parameters
ipaddr - The IP address of the TFTP server.
ipv6addr - The IPV6 address of the TFTP server.
domain_name - The domain name of the TFTP server.
dest_file - Used to identify the parameter “path_filename”.
path_filename - Specifies the path name on the TFTP server to hold the attack log.
unit - The attack log messages on the specified unit will be uploaded to the TFTP server. If it
is not specified, it refers to the master unit.
Restrictions Only Administrator and Operator-level users can issue this command.
Example usage:
To upload the master’s dangerous log:
DGS-3627:admin# upload attack_log 10.90.90.1 dest_file C:\alert.txt
Command: upload attack_log 10.90.90.1 dest_file C:\alert.txt
Success.
DGS-3627:admin#