GPSMAP
®
4000/5000 Series Owner’s Manual 71
Radar
Adjusting the VRM and the EBL
You must show the VRM and the EBL before you can adjust them (page 70).
You can adjust the diameter of the VRM and the angle of the EBL, which moves the intersection point of the
VRM and the EBL. The VRM and the EBL congured for one mode are applied to all other radar modes.
1. From the Home screen, select .
2. Select , , , or .
3. Complete an action:
• Select >> for Cruising, Harbor, or Offshore Mode.
• Congure the setting for the short-range screen in Dual Range mode. Select > >
> for the GPSMAP 4000 series. Select > >
for the GPSMAP 5000 series.
• Congure the setting for the long-range screen in Dual Range mode. Select > >
> for the GPSMAP 4000 series. Select > >
for the GPSMAP 5000 series.
4. Select a new location for the intersection point of the VRM and the EBL.
5. Select .
Measuring the Range and Bearing to a Target Object
You must show the VRM and the EBL before you can adjust them (page 70).
The VRM and the EBL congured for one mode are applied to all other radar modes.
1. From the Home screen, select .
2. Select , , , or .
3. Complete an action:
• Select >> for Cruising, Harbor, or Offshore Mode.
• Congure the setting for the short-range screen in Dual Range mode. Select > >
> for the GPSMAP 4000 series. Select > >
for the GPSMAP 5000 series.
• Congure the setting for the long-range screen in Dual Range mode. Select > >
> for the GPSMAP 4000 series. Select > >
for the GPSMAP 5000 series.
4. Complete an action:
• For the GPSMAP 4000 series, use the to adjust the diameter of the VRM and the angle of the
EBL, so that the intersection point of the VRM and EBL is at the target location
• For the GPSMAP 5000 series, touch the target location.
The range and the bearing to the target location appear in the upper-left corner of the screen.
5. Select .
Displaying the Distance to a Point on the Radar Screen
You can select a point on the radar screen to display the distance and bearing of that location from your present
location in the upper-left corner of the screen.
1. From the Home screen, select .
2. Select , , , or .
3. Select the desired location on the radar screen.
The distance and bearing to the selected location is displayed in the upper-left corner of the screen.
4. Select .
