A SERVICE OF

logo

Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
190-00728-04 Rev. A
370
HAZARD AVOIDANCE
Figure 6-62 Vertical Scan Display
aDjUsting antenna tilt angle
Inordertomakeanaccurateinterpretationofastormcell,theradarbeamshouldbepointedatthewet
partoftheweathercelltorecordtheproperrainfallintensity(colorlevel).Theidealaimingpointisjust
belowthefreezinglevelofthestorm.ThebestwaytondthispointistousetheVerticalScanfeature.The
antenna tilt angle can be centered on the strongest return area in the vertical scan to get a more accurate
view of the coverage and intensity of the target in the horizontal scan.
Adjusting antenna tilt on the Horizontal Scan display:
1) Press the
FMS Knob to activate the cursor in the TILT field.
2) Turn the small
FMS Knob to select the desired antenna tilt angle.
3) Press the ENT Key.
4) Press the FMS Knob to remove the cursor.
TheRANGE Knob can also be used to adjust tilt up and down.