6 - 30 PANELWARE MMI Application Manual for GE Fanuc Genius Protocol - June 1995 GFK-1115
6
Tip
If the field ends up in the wrong position in your picture, you can easily move it. First, move the
cursor into the field. With key combination Ctrl + Cursor key, the field can be moved to the
desired position.
4. Now, insert an input field into the picture in which a value
— data format: Word (signed) —
can be entered directly through the Panel Keyblock. This is done as follows:
● Position the cursor at (10,3).
● Press F2 Field.
● Select the Input Field option from the Field Class window and then press the ↵↵ key.
● From the Select Field Type window, choose the Input Word (signed) option, which
opens a window for defining the parameters for the selected input field:
● Enter
INP
_
INT
as the Destination Tagname and confirm the entry by pressing ↵↵. The
declaration of this address is done collectively for all variables in the connection editor.
● Do not change any more parameters. End the definition with F4 Accept. The Input
Word (signed) window is closed. The input field can now be seen in the picture:
