6 - 44 PANELWARE MMI Application Manual for GE Fanuc Genius Protocol - June 1995 GFK-1115
6
4. Insert the second input field into the picture.
● Insert the input field Input Word (unsigned) into the picture (at cursor position 10,5)
with the following parameters:
Field parameters
Position:.............................................10,5
Number of Digits: ..............................
5
Places after the dec. point:..................
0
Character Size:...................................
1
Field Width:.......................................
5
Destination Tagname:........................
INPUT#2
Tagname for Completion:
Value for Completion:........................
0
Up/Down Input? (Y/N): .....................
No
Locking Active? (Y/N):......................
Yes
Scaling ? (Y/N)..................................
No
Press F2 Locking and enter the following parameters for the input locking configuration:
Tagname for Locking Value:..............
PASSWORD
Input Locked if:..................................Locking Value < Password Level
Password Level: .................................
3
− For the first parameter Tagname for Locking Value enter the address that you have
entered in the input field for the password (PASSWORD).
− Locking Conditions Locking Value< Password Level causes the input field to be
locked if the locking value is less than the password level.
− A password level of value 3 ensures that only one entry is possible in this field if the
password for level #3 has already been given.
5. The next step is to define the LED functions.
● Function keys F1 and F4 will be assigned LED functions Key LED switched on. These
keys are used to switch to another picture.
● The method used in assigning LED functions to specific keys is described in step 5 under
“Main Picture” (see page 6-26).
6. Now save the picture under the name INPLOCK.
