Statistics Commands
71
Table 46 802.1x statistics for port
Statistics
Description
backendNonNakResponsesFrom
Supplicant
Total number of times that the state machine receives a response from
the Supplicant to an initial EAP-Request, and the response is
something other than EAP-NAK. Indicates that the Supplicant can
respond to the Authenticators chosen EAP-method.
backendAuthSuccesses
Total number of times that the state machine receives an Accept
message from the Authentication Server. Indicates that the Supplicant
has successfully authenticated to the Authentication Server.
backendAuthFails
Total number of times that the state machine receives a Reject
message from the Authentication Server. Indicates that the Supplicant
has not authenticated to the Authentication Server.
Bridging statistics
Use the following command to display the bridging statistics of the selected port:
show interface port <port number> bridging-counters
Command mode: All
Bridging statistics for port 1:
dot1PortInFrames: 63242584
dot1PortOutFrames: 63277826
dot1PortInDiscards: 0
dot1TpLearnedEntryDiscards: 0
dot1StpPortForwardTransitions: 0
The following table describes the bridging statistics for a selected port:
Table 47 Bridging statistics for port
Statistics Description
dot1PortInFrames
The number of frames that have been received by this port from its
segment.
A frame received on the interface corresponding to this port is counted
by this object, if and only if, it is for a protocol being processed by the
local bridging function, including bridge management frames.
dot1PortOutFrames
The number of frames that have been transmitted by this port to its
segment.
A frame transmitted on the interface corresponding to this port is counted
by this object, if and only if, it is for a protocol being processed by the
local bridging function, including bridge management frames.
dot1PortInDiscards
Count of valid frames received which were discarded (that is, filtered) by
the forwarding process.
