A SERVICE OF

logo

Open as PDF
next previous
Funk Odyssey Client Configuration 221
E-EQ-MX7RG-B MX7 Reference Guide
WPA/PSK Configuration
To start the WPA/PSK configuration tap Settings | Configure.
Tap the Add button to configure a profile.
Figure 5-64 Enter Name of Network
On the Add Network Wizard screen type the SSID of the wireless network. If the SSID is being
broadcast by the AP, press Scan and choose the correct SSID.
Choose Infrastructure for the network type.
Figure 5-65 Set the Association Mode to WPA
Set the Association mode to “WPA” and Encryption Method to “TKIP”.
For WPA/PSK uncheck the “Authenticate using 802.1X” checkbox.
“Keys will …” box is grayed out when the encryption method is set to TKIP. Enter the Pre-shared
key as entered in the AP. Tap Next and Finish to complete the configuration.