IEEE 802.11g Wireless LAN Configuration Utility 239
E-EQ-MX7RG-B MX7 Reference Guide
Figure 5-94 802.11g WiFi Configuration Utility Menus - Conf, About, Save&Exit
Configuration default options :
Power Save Save Mode/Dynamic; Valid Mode/Static Mode. Dynamic save mode sets the radio
to allow it to enter Power Save mode. LXE does not recommend using Maximum
save mode.
Antenna Diversity
Roaming Profile displayed and greyed out; Threshold populated by RSSI Control panel
setting
Scanning Mode displayed and greyed out
The About screen displays version information. The values cannot be edited by the user.
Save&Exit buttons: The Save button is greyed out if there have been no changes made to the
802.11g parameters since the last reboot. If WiFi changes have been made, tap the Save button
and then tap OK to save the changes. The WiFi icon minimizes to the taskbar. Tap the Exit button
to close the WiFi utility and the WiFi icon is removed from the taskbar. LXE recommends the
WiFi icon be visible in the taskbar at all times.
If the WiFi utility is closed accidentally you can either perform a Warm Reset to restart the WiFi
utility or tap Start | Programs | Radio Config Utility.
