A SERVICE OF

logo

12
1 INSTALLATION
(4)Plug the other end of the cable into the video connector on the rear of
the PC.
Standard PC graphics board
Macintosh
(5)Plug the power cord into the power connector on the rear of the LCD
monitor.
(6)Replacing the connector cover and the rear cover.
a) Insert the rear cover into the inlets at the bottom of the stand.
b) To close easily, the LCD monitor should be tilted forward. Attach
the connector cover to the rear panel of the LCD.
(7)Plug the other end of the power cord into a power outlet.
(8)Turn on the monitors main power and then switch on the PC power.
Whenever you finish your operation, turn off the PC and the monitor.
Signal Cable (enclosed)
Standard PC
graphics board
D-Sub mini15
pin
D-Sub mini15
pin
Macintosh
Macintosh G3
(Blue & White)
Macintosh Adapter DSCR-153 (optional)
Signal Cable (enclosed)
D-Sub mini15
pin
D-Sub mini15
pin
Signal Cable (enclosed)
D-Sub mini15
pin
D-Sub 15
pin
D-Sub mini15
pin
2
1