20
2 USING THE SCREENMANAGER
Adjustment Procedure
Overview
• Allow the LCD monitor to warm up for at least 20 minutes before
making adjustments.
• To make adjustment easily, install and run the “Screen Adjustment
Program” in the attached utility disk. Before adjustment, read the
“readme.txt” file.
• Do not continuously press the Control buttons (up, down, right and left
buttons) on the front panel, as the adjustment value will change quickly
and make it difficult to locate the most suitable adjustment point.
(1) Install and run the "Screen Adjustment Program"
in the utility disk.
(2) Push the Auto adjustment button.
(3) Enter the ScreenManager and select the
"Screen" menu.
Horizontal bars appear.
OK
(9) Exit the ScreenManager.
(4) "Clock" adjustment
(5) "Phase" adjustment
(6) "Position" adjustment
(8) "Contrast/Brightness" adjustment
(7) Confirm the "Resolution".
