E
31
2 USING THE SCREENMANAGER
Function
Changes the brightness of the black area
surrounding the displayed image.
· This adjustment is disable in full screen mode.
What is the “Border Intensity” function?
With lower resolutions of (640 x 480, 800 x 600,
1024 x 768, etc.) the image is displayed at the
center of the screen and the outer area (border) is
usually black. The “Border Intensity” function can
set the brightness of this border area to any
brightness level that maybe desired.
Selects which PC will have priority to control the
monitor when utilizing two PCs.
Priority Performance
setting
If signals from both inputs are present, the
monitor gives preference to Signal 1 for the
cases shown below:
• When the power of the monitor is turned
ON (see note 1).
• When the signal input to Signal 1 is
changed even if active input was Signal 2.
If signals from both inputs are present, the
monitor gives preference to Signal 2 for the
cases shown below:
• When the power of the monitor is turned
ON (see note 1).
• When the signal input to Signal 2 is
changed even if active input was Signal 1.
The monitor will not detect signals
automatically in this mode. Select the active
input by pressing the input signal selection
button on the monitor’s front panel.
Input Priority
Automatically Turns off the Monitor
What is Off Timer?
The Off Timer function allows the user to set the
time in which the monitor will be in operation,
called the “On Period” and automatically shifts the
operation into the “Power Off” mode when the set
“On Period” expires. The Off Timer function was
created to reduce afterimage characteristics that
are particular to LCD monitors when the monitor
screen is left on for a long period without use.
Off Timer
Signal 1
Signal 2
Manual
Border
Intensity
