ZENworks® ESM 3.5 Administrator’s Manual 143
• Timer Run Every- set the time to run every minute, hour, or day
• Miscellaneous Events - the script will run when one or more of the selected
event(s) occur on the endpoint
• Location Change Event - the script will run when a selected location change
event occurs. These events are NOT independent. They are additive to the pre-
vious event.
• Check Location Change Event - script will run at ALL location changes
• Activate when switching from - script will run only when the user leaves
this (specified) location to any location
• Activate when switching to - script will run when the user enters this
(specified) location from any location (if Activate when switching from
was given a location parameter (example: office), the script will ONLY run
when the location switches from office to the specified location)
• Must be a manual change - script will run only when the user manually
switches from or to a location
Step 4: Create any Script Variables - See “Script Variables” on page 144.
Step 5: Write the Script Text - See “Script Text” on page 145.
Step 6: Click
Save. Repeat the above steps to create a new advanced scripting rule
To associate an existing advanced scripting rule:
Step 1: Select Advanced Scripting Rules in the components tree and click Associate New
Step 2: Select the desired rule(s) from the list
Step 3: The trigger event, variables, or script may be re-defined
Note:
Changing the settings in a shared component will affect ALL OTHER instances of this same component.
Use the Show Usage command to view all other policies associated with this component.
Step 4: Click Save
