Pitco Frialator L22-345 Manual

A SERVICE OF

next previous

PitcoSolsticeandSolsticeSupremeHighEfficiencyGasFryers





7. Remove one (1) screw, which holds the bracket,

using a 5/16 inch socket.

8. Remove the bracket.

NOTE: The filter pump will fall to the floor

once the pins are pulled out. It is

recommended that you brace the

pump and motor before pulling out

the pins.

9. Turn down the pins and then pull them out.

10. Lower the filter pump to the floor and then pull

it out.

11. Remove the three (3) bolts on the bottom of the

filter pump base using a 1/2 inch open-ended

wrench.

12. Remove two (2) screws on back of filter pum

p

using a 5/16 inch socket.



SG/SSHSeriesServiceManua

l 69