A SERVICE OF

logo

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO15-33001A
(Revision Date: Jan. 19, 2006)
3. Wireless LAN Module: B-SA704-WLAN-QM
3- 3
3. Remove the two SMW-3x6 screws to detach the Blind Plate.
4. Remove the SMW-3x8 screw to detach the Cable Clamp.
5. Put the Antenna of the Wireless LAN Board out of the opening in the printer back.
Care must be taken not to hit the Antenna against the printer frame, as damaged antenna may affect the
performance.
SMW-3x6
Blind Plate
Cable Clamp
SMW-3x8 Scre
w
Opening
Wireless LAN Board
Antenna
A
ntenna