INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO15-33001A
(Revision Date: Feb. 25, 2008)
8. RFID Module: B-SA704-RFID-U2-EU-R
8- 11
• RFID Module Settings
After installing the RFID Module on the printer, configure the RFID module settings using the system mode
on the printer.
RFID setting menu ”<10>RFID” is displayed.
Press the [PAUSE] key.
[RESTART]
<10>RFID
<1>DIAG. V1.6
Turn on the printer while holding
down the [FEED] and [PAUSE]
keys at the same time.
When “<1>DIAG. V1.6“ appears on the LCD, press the [RESTART] key.
[PAUSE]
<10>RFID
READ TEST OFF
[PAUSE]
Read test menu is displayed. Choose whether to perform a read test or not with
the [RESTART] or [FEED] key.
[RESTART]
[FEED]
READ TEST OFF
READ TEST ON
<10>RFID
CAREERSENSE OFF
OFF: A read test is not performed. (Initially, choose “OFF”.)
ON: A read test is performed.
The printer enters the read test mode, and a read test is performed each time the
[PAUSE] key is pressed. When the data of a tag can be read, it is displayed on the
LCD.
• Read data is displayed in hex. value on the 16-digit x 2-line LCD.
When the RFID tag contains 16 digits or more data, the first 16 digits are displayed.
When data volume is less than 16 digits, the vacant digits will be filled with spaces.
• If the tag cannot be read, “RFID TIMEOUT” or “RFID READ ERROR” is displayed.
• If the type of the tag to be read and one selected by the RFID tag type selection do not
match, an RFID tag read error will result.
Make sure the RFID tag type has been selected before the read test is started.
After choosing an option, press the [PAUSE] key.
1234567890123456
6543210987654321
Carrier sense setting menu is displayed. This menu is not available to the B-SA704-RFID-
U2-EU-R. Press the [PAUSE] key to skip this menu.
[PAUSE]
<10>RFID
MODULE NONE
Module type setting menu is displayed. Choose “U2” with the [FEED] or [RESTART] key.
[RESTART]
[FEED]
U1: Not available.
H1: not available.
NONE: No RFID Module is installed.
U2: B-SA704-RFID-U2-EU-R
H2: Not available.
[PAUSE]
Press the [PAUSE] key.
Continued to the next
page.
