INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT EO15-33001A
5. 300 dpi Print Head Kit: B-SA704-TPH3-QM-R
5- 1
5. 300 dpi Print Head Kit: B-SA704-TPH3-QM-R
B-SA704-TPH3-QM-R is an optional 300 dpi print head kit for the B-SA4TM/SA4TP-GS12 Series (203dpi
printer).
You will obtain the same print quality as the TS12 model (300 dpi) only by replacing the current print head
with this optional kit.
The pictures used in this section are those of the B-SA4TM, however, the installation procedure is common
with the B-SA4TP.
• Packing List
The following parts are supplied with the kit. Make sure you have all items shown below.
300 dpi print head (1 pc.)
Installation Manual (1 copy)
Do not touch the print head or its neighboring parts immediately after printing, or you may burn
yourself.
WARNING
CAUTION!
1. NEVER loosen or remove the following two screws of the Print Head as they have been fine
adjusted before shipment. If they are loosened or removed, print quality may become
deteriorated.
2. Do not touch the Print Head Element when handling the Print Head.
NEVER loosen or remove
these screws.
