Filter
Top Products
24 LANPLEX® 6000 EXTENDED SWITCHING SOFTWARE
SNMP MIB Files SNMP MIB files are shipped with the LANplex system software as ASN.1 files
on one of the software diskettes. Copies of ASN.1 files are provided for each
of the supported compilers described at the end of this section.
Supported Versions The SNMP MIB file names and the currently supported version of each MIB
are listed here:
■ bridge.mib — Bridge MIB, RFC 1493
■ ethernet.mib — Ethernet MIB, RFC 1398
■ if.mib — If MIB, RFC 1573
■ fddiSmt7.mib — FDDI SMT 7.3 MIB, RFC 1512
■ lp.mib — LANplex Systems MIB, version 1.3.0
■ lpOpFddi.mib — LANplex Optional FDDI MIB, version 1.2.1
■ mib2.mib — MIB-II, RFC 1213
■ srbridge.mib —Source Routing MIB RFC1525
Compiler Support ASN.1 MIB files are provided for each of the MIB compilers listed in this
section. Any warnings or exceptions related to a compiler are listed with it.
■ SMIC (version 1.0.9)
■ MOSY (version 7.1)
For the MIB file lpOpFddi.mib, the MOSY compiler reports warnings for
counter names that do not end in “s”. This report has no effect on the
output produced by the MOSY compiler.
■ HP Openview (version 3.1)