Filter
Top Products
6
LAN
PLEX
® 6000 E
XTENDED
S
WITCHING
S
OFTWARE
Extended Switching
Software
Requirement
Release 8.0.0 or greater of Extended Switching Software requires a
minimum of 2 MB of memory on Ethernet/FDDI Switching Modules
(EFSMs). Memory configuration may vary. If you have an EFSM with 1 MB of
memory, you can order a memory upgrade. Contact your sales
representative.
To determine the amount of memory on the EFSM, you can either look at
the lower ejector tab label or use the
system display
command from the
top level of the Administration Console. EFSMs with only 1 MB of memory
will have blank lower ejector tabs. EFSMs with minimum of 2 MB of memory
have “2MB” on the lower ejector tab labels.
Release Highlights
for 8.0.2
This release contains updated system diagnostics.
Release Highlights
for 8.0.1
This release contains the following items:
■
Support for IP routing on the FDDI Switching Module (FSM)
■
Several problem fixes, which have been implemented at this release
Release Highlights
for 8.0.0
This release contains the following items:
■
Support for the FDDI Switching Module (FSM)
■
Support for the EFSM TP-DDI Module
■
Support for RMON
■
RMON MIB support
■
State
field added to interface display
■
System menu item
upTime
added
■
New FDDI MAC statistic
rxErrors
■
New fields added to FDDI MAC summary and detail displays
■
Configurable Source Route hop count limit
■
LANplex MIB support updates
■
Bridge MIB support for the FSM
■
New If MIB