Filter
Top Products
Integration in Tivoli NetView 33
5 Configuration and Operation
This chapter describes how you can start up and manage the components
installed with the integration package.
In NetView you can automatically search your network for any network compo-
nents in the “managed objects” (Discovery). With Discovery, NetView accesses
the SNMP agents and assigns corresponding default symbols to the various
device types.
The components found are entered in the submap of the relevant device (e.g.
IP interfaces or network cards).
5.1 Configuring Fujitsu Siemens Servers with
the Map Application
Fujitsu Siemens PRIMERGY servers must be configured for the following
reasons:
– The servers should be visibly distinguishable from other devices in the map.
– The status of the ServerView agents should be mapped to appropriate
component symbols in the map.
I Fujitsu Siemens servers can be configured only in a map with read/write
privileges. The Map application makes changes to the objects and
symbols in the NetView map.