AEG 49332I-MN Cooktop User Manual


 
OVEN - CLOCK FUNCTIONS
Clock function Application
Time of day Shows the time. To set, change or check the time.
Minute minder To set a countdown time.
A signal sounds, after the time period is completed.
Duration To set how long the oven has to be in operation.
End To set the switch-off time for an oven function.
Duration and End can be
used at the same time, if the
oven is to be switched on and
off automatically later. In this
case first set Duration
, then
End
.
SETTING THE CLOCK
FUNCTIONS
1.
Activate the appliance.
2.
Use again and again until the
display shows the necessary clock
function and the related symbol,
for example Minute Minder
.
3.
Use or to set the necessary
time.
When the time is completed, an
acoustic signal sounds for 2 mi-
nutes, and “00.00” and the related
function indicator flash. The appli-
ance deactivates.
4.
Press a button to stop the acoustic
signal.
With Minute Minder , you
must activate the oven to set
the clock function.
With Duration and End ,
the oven deactivates automati-
cally. You must set the oven
function and the temperature
first before you can set the clock
function.
HEAT+HOLD
The Heat+Hold function keeps pre-
pared food warm for 30 minutes after
the cooking is completed.
Activating Heat+Hold
1.
Set the time with the clock func-
tions Duration
and/or End .
2.
Use Selection again and
again until the display shows the
symbol Keep warm
.
3.
Press and the display shows
“00:30”.
4.
When the set oven function is com-
pleted, a signal sounds and Heat
+Hold starts. The set oven function
operates at 80°C for 30 minutes.
The oven then deactivates auto-
matically.
The temperature for the set
oven function must be above
80°C.
22