AEG 49332I-MN Cooktop User Manual


 
BEFORE FIRST USE
WARNING!
Refer to "Safety information"
chapter.
INITIAL CLEANING
Remove all accessories and remova-
ble shelf supports (if applicable).
Clean the appliance before first use.
Refer to the chapter "Care and
cleaning".
SETTING THE TIME
You must set the time before
you operate the oven.
When you connect the appliance to the
electrical supply or after a power cut,
the indicator for the Time function
flashes.
Press the + or - button to set the cor-
rect time.
After approximately five seconds, the
flashing stops and the display shows
the time of day you set.
You can only change the time
if :
The child safety device is not
on.
None of the clock functions
Duration
or End is set.
No oven function is set.
PREHEATING
Preheat the empty appliance to burn
off the remaining grease.
1.
Set the function and the maxi-
mum temperature.
2.
Let the appliance operate for one
hour.
3.
Set the function and the maxi-
mum temperature.
4.
Let the appliance operate for ten
minutes.
5.
Set the function and the maxi-
mum temperature.
6.
Let the appliance operate for ten
minutes.
Accessories can become hotter than
usually. The appliance can emit an
odour and smoke. This is normal. Make
sure that the airflow is sufficient.
ENGLISH
9