Filter
Top Products
28
8b. Set and start the programme with "delay start"
● Select the wash programme by simply pressing one of the programme
pushbuttons, the display will show the running time of the programme
in minutes and the indicator lights of the phases corresponding to the
programme will illuminate.
● If necessary select the "small load" by pressing the corresponding
pushbutton (in this case the running time of the programme will be
adequated).
With the selection of the programmes "Quick 50°C" and "Rinse and
Hold" the small load option is not available.
● Press the "delay start" pushbutton, in the display appears h1. Select
the time by pressing repeatedly the "delay start" pushbutton until the
required number of hours appear in the display. You can delay the start
of a programme up to a maximum of 12 hours (h12).
To cancel the setting of the delay start press the pushbutton until the
running time of the selected programme reappears in the display.
● If the setting of the programme has been made with the door
opened:
close the door and the dishwasher starts the countdown automatically
after 5 seconds. The number of hours to go before the programme
starts appears in the display and decreases from hour to hour. The
letter h flashing in the display indicates that the delay start is active.
● If the setting of the programme has been made with the door
closed:
the dishwasher will start the countdown automatically after 5 seconds
from the last pressure of a pushbutton.
● Once the delay set has elapsed the programme will start automatically,
the indicator lights of the phases turn off except for the light of the
phase under way. The displayed time will start to decrease from minute
to minute.
152985 56/1 en-es 30-11-1999 15:04 Pagina 28