Filter
Top Products
Rev 0.0 21
INSTALLATION INSTRUCTIONS
EN
Connecting to a “T” union of the drain circuit
MAKE THE CONNECTION UPLINE FROM THE SIPHON OF THE DRAIN
LINE AND AT LEAST 400 mm 153/4” ABOVE THE FLOOR ON WHICH
THE DISHWASHER WILL BE INSTALLED.
Connect the dishwasher drain hose (ref. A g. 5-11) to the “T” union (ref. B g. 1.
5-11) of the drain circuit using a 38 to 50 mm (1-1/2 to 2”) screw clamp* (ref. C
g. 5-11); if necessary, cut the end of the dishwasher drain hose (ref. D g. 5-11)
(do not cut the corrugated section).
* Available from any plumbing stockist
Fig. 5-11
A
C
B
D