Filter
Top Products
Rev 0.0 25
INSTALLATION INSTRUCTIONS
EN
5 .2.2 Electrical connections and warnings
CHECK THAT THE VOLTAGE AND THE FREQUENCY OF THE MAINS MATCH
THE RATINGS ON THE NAME PLATE OF THE APPLIANCE POSITIONED ON
THE INNER EDGE OF THE DOOR.
IN THE EVENT OF DAMAGE TO THE SUPPLY CORD, HAVE IT RE
PLACED BY THE MANUFACTURER OR AN AUTHORIZED TECHNICAL SER
VICE CENTRE.
THIS APPLIANCE MUST BE GROUNDED. IN CASE OF A MALFUNCTION OF
FAULT, THE GROUND REDUCES THE RISK OF ELECTROCUTION BY PRO
VIDING THE ELECTRICAL CURRENT WITH AN ALTERNATIVE, LESS RESIS
TANT PATH.
THIS APPLIANCE MUST BE GROUNDED. IN CASE OF A MALFUNCTION OF
FAULT, THE GROUND REDUCES THE RISK OF ELECTROCUTION BY PRO
VIDING THE ELECTRICAL CURRENT WITH AN ALTERNATIVE, LESS RESIS
TANT PATH. THIS APPLIANCE IS FITTED WITH A SUPPLY CORD CONTAIN
ING A GROUND WIRE AND PLUG. FIT THE PLUG INTO A SUITABLE SOCKET,
INSTALLED AND GROUNDED IN COMPLIANCE WITH THE LAWS IN FORCE
IN THE COUNTRY OF INSTALLATION.
BEFORE MAKING ELECTRICAL CONNECTIONS, DISCONNECT THE
MAINS POWER SUPPLY FROM THE WORK AREA.
Grounding instructions
This appliance is tted with a cord with ground wire and plug. Fit the plug into
a suitable socket, installed and grounded in compliance with the laws in force in
the country of installation.
CHECK THAT THE MAINS SUPPLY IN THE PLACE OF INSTALLATION COM
PLIES WITH THE REGULATIONS IN FORCE IN THE COUNTRY OF USE, AND
THAT IT IS CORRECTLY GROUNDED.
AN INCORRECTLY CONNECTED GROUND WIRE MAY GENERATE THE RISK
OF ELECTROCUTION. IF IN DOUBT AS TO THE CORRECT GROUNDING OF
THE APPLIANCE, CALL IN A QUALIFIED ELECTRICIAN OR THE TECHNICAL
ASSISTANCE SERVICE. DO NOT CHANGE THE PLUG ATTACHED TO THE
APPLIANCE. IF THE PLUG IS NOT SUITABLE FOR THE SOCKET, CALL IN A
QUALIFIED ELECTRICIAN TO FIT A SUITABLE PLUG.